General Purpose Industrial Grade Accelerometers

ACC101

accelerometers

REALIZAR PEDIDO

Industrial Accelerometers
Ideal for Machine Vibration Monitoring
Low Impedance Drives Cable Lengths to 300 metres
Fast Turn-on Time (1 Sec.)
100 mV/g Output

Medición dinámica - Ver productos relacionados

Descripción

Más información en el siguiente link sobre el funcionamiento de un acelerómetro.

The ACC101 accelerometer is low cost yet extremely durable. These accelerometers are constructed using high strength aluminium, and feature a rugged strain relief, ¼-28 stud mounting, an epoxy seal, and use the kind of dependable components usually found only in higher priced accelerometers.

SPECIFICATIONS
Excitation: 2 mA nominal @ 24 to 30 Vdc, constant current (18 volt supply can be used but will limit amplitude range)
Rated Output: 100 mV/g nominal @ 100 Hz
Frequency Range: 3 Hz to 5 kHz (up to ±10 % rated output shift)
Amplitude Range: ±80 g peak with ACC-PS3A power supply/amplifier
Amplitude Linearity: ±1% up to 65 g peak
Temperature Range: -18 to 82°C
Temperature Sensitivity Effect:
-54 to 38°C ≤ 5% FS
38 to 121°C ≤ 8% FS
Thermal Shock: 1.2 g /°C
Transverse Sensitivity: 5% of axial maximum
Maximum g Without Damage: 5,000 g peak
Maximum g Without Clipping: ±80 g peak
Mounted Resonance Frequency: >18 kHz
Output Impedance: 50 Ω nominal
Bias Voltage: 10 V nominal
Base Strain: 0.002 g/microstrain max.
Noise Floor (wideband): 0.00025 g (rms)
Weight: 50 grams nominal (without cable)
Material: Aluminium, hard anodised thermal insulating boot included
Dimensions: 3.81 H x 2.54 cm hex base
Connector: 3 metre integral coaxial cable with BNCM
Mounting: 1/4-28 removable stud
Mounting Torque max: 40 cm-kg (35 in-lb)

Realizar Pedido(Especifique el número de modelo)

¿Qué compraron otras personas?: Cuando se muestre este icono, haga clic para expandir una lista de los productos que otras personas adquirieron al comprar ese modelo.

Número de pieza/Desc.

Cant.

Descripción

ACC101

Consult Sales

Stock:

Accelerometer with 3 metre cable

Accessories

MAGNET1

€124.62

Stock: 1 semana

Magnetic mounting base 4.5 kg holding force (10 lb) 19 mm diameter x 19 mm high.

Amplifiers and Power Supplies

ACC-PS3A-230VAC

Consult Sales

Stock:

230 Vac powered constant current power supply (BNCF connections)

Interface cables used between power supply and instrumentation

ACC-CB4-6

Consult Sales

Stock:

1.8 metre long coaxial cable (BNCM/BNCM)

ACC-CB4-15

€82.21

Stock: 1 semana

4.5 metre long coaxial cable (BNCM/BNCM)

ACC-CB5-2

€71.39

Stock: 8 semanas

60 cm long coaxial cable (BNCM/banana plug)

ACC-CB6

€31.80

Stock: 1 semana

175 mm long coaxial cable (BNCM/pigtail)

† Todos los precios se muestran en EUR
Ordering Example: (1) ACC-CB5-2 60 cm long output cable for amplifer. BNC to banana plugs, €71.39