Industrial Accelerometer

ACC102

acceleration sensor

REALIZAR PEDIDO

Ideal for Harsh Environments
Hermetically Sealed
Superior Low Noise Floor for High Resolution
Rugged Strain Relief on Integral Cable
Fast Turn-on Time (1 Sec)
High EMI Noise Rejection
100 mV/g Output

Medición dinámica - Ver productos relacionados

Descripción

Mas información sobre el funcionamiento de un acelerómetro.

The ACC102A accelerometer uses a shear mode design for high performance. It has a rugged stainless steel inner structure covered by a moulded polymer. This construction makes the ACC102A impervious to harsh environments, such as alkaline coolants, hot oil and water sprays, resulting in long, reliable service. Additional features include high shock protection (to protect from dropping or mishandling), cross wire protection (protects against mis-wiring), and up to 1000 volt static discharge protection.

The ACC102A has a high 100 mV/g output and measures across wide frequency and acceleration ranges. A low impedance cable allows for runs up to 300 metres. The ACC102A exhibits the low noise floor and high amplitude linearity you’d expect in more expensive units.

SPECIFICATIONS
Excitation: 2 mA @ 24 to 30 Vdc, constant current (18 V supply can be used but will limit amplitude range)
Rated Output: 100 mV/g nominal at 100 Hz
Frequency Range: 3 Hz to 5 kHz (up to ±5% rated output shift)
Amplitude Range: ±75 g peak with ACC-PS3A amplifier/power supply
Amplitude Linearity: 1% up to 65 g peak
Temperature Range: -40 to 82°C
Temperature Sensitivity Effect:
-54 to 38°C: ≤5% FS;
38 to 121°C: ≤8% FS
Thermal Shock: 1.2 g/°C
Transverse Sensitivity: 7% of axial max
Maximum g Without Damage: 5000 g peak
Maximum g Without Clipping: 75 g peak
Mounted Resonance Frequency: >23 kHz nominal
Output Impedance: 200 Ω nominal
Bias Voltage: 13 V nominal
Base Strain: 0.04 g/microstrain nominal
Noise Floor (Wideband): 0.0003 g (rms)
Weight: 50 g nominal (without cable)
Material:
Inner Housing: 303 SS
Outer Jacket: Non-conductive composite polymer
Dimensions: 2.16 H x 2.54 cm D
Connector: 3 metre integral coaxial cable to BNCM
Mounting: 10-32 removable stud
Mounting Torque Max: 22 cm-kg (20 in-lb)

Realizar Pedido(Especifique el número de modelo)

¿Qué compraron otras personas?: Cuando se muestre este icono, haga clic para expandir una lista de los productos que otras personas adquirieron al comprar ese modelo.

Número de pieza/Desc.

Cant.

Descripción

ACC102A

Consult Sales

Stock:

Industrial accelerometer with 3 metre cable

Accessories

ACC-PS3A-230VAC

Consult Sales

Stock:

Accelerometer constant current power supply. 230 Vac powered

ACC-CB4-6

Consult Sales

Stock:

1.8 metre long coaxial cable (BNCM/BNCM)

ACC-CB4-15

€82.21

Stock: 1 semana

4.5 metre long coaxial cable (BNCM/BNCM)

ACC-CB5-2

€71.39

Stock: 8 semanas

60 cm long coaxial cable (BNCM/banana plug)

ACC-CB6

€31.80

Stock: 1 semana

175 mm long coaxial cable (BNCM/pigtail)

† Todos los precios se muestran en EUR