Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer, que usted está dispuesto a recibir todas las cookies de este sitio web. Para obtener más información acerca de las cookies, por favor haga clic aquí.
Cesta  |  Contacto  | 
800 900 532  | 
Tel. gratuito800 900 532
Fuera de Españ(+34) 911 776 121

Su única funte para la Medición y Control de procesos

20 Channel Recorder

DR130 Series

DR130 Series:20 Channel Recorder

  • High-Speed Scanning and Recording
  • Ten-Colour Recording
  • Thermocouple, RTD, Voltage Inputs
  • Optional Floppy Drive for Data Storage
  • Easy-to-Carry, Lightweight Design
Registradores - Ver productos relacionados


The OMEGA® DR130 Series portable hybrid recorder offers high speed scanning of 20 points/2 sec and high speed recording. This versatile recorder weighs less than 10 kg (21 lb). Operation is simple, yet powerful optional computing functions and floppy disk enhance the unit’s performance. The DR130 uses a high breakdown voltage solid state relay that permits high scan speed and long relay life without noise.


Number of Inputs: Up to 10 or 20 points
A/D Resolution: ±20,000
Reference Junction Compensation Error: ±1°C (1.8°F) (R, S, B, C, W), ±0.5°C/0.9°F (K, J, T, E, N, U, L CHROMEGAR vs. Au7% Fe)
Scan Cycle Time: 2 to 60 sec selectable (2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60 sec)
A/D Integration Time: 20 msec (50 Hz), 16.7 msec (60 Hz), and 100 msec (10 Hz), (50/60 Hz) selectable
Input Impedance: >10 M on 2 V or lower ranges and T/C; approx. 1 M on 6 V or higher ranges
Input Bias Current: <10 nA
Thermocouple Burnout Protection: ON or OFF selectable for each channel
Temperature Coefficient: zero drift; 0.01% of range/°C, full span; 0.01% of range/°C
Max. Input Voltage: ±10 Vdc (60 V on 6 V or greater ranges)
Common Mode Voltage: 250 Vrms ac (50/60Hz)
Common Mode Rejection: 120 dB (50 or 60 Hz ±0.1%)
Normal Mode Rejection: 40 dB (50 or 60 Hz ±0.1%) Max between Chan: 150 Vrms ac (50/60 Hz except RTD)
Printing Technique: Raster scan using a wire-dot printer and 10-colour ribbon
Effective Recording Span: 150 mm (5.9"), analogue
Chart: Z-fold chart, 230 mm (9") width, 20 m (65.5') long
Recording Resolution: ±0.1 mm
Recording Accuracy: measurement accuracy plus (±0.2% of effective recording span)
Printout Format: analogue trend/ analogue trend plus digital datalogging
Chart Speed: 1 to 1500 mm/hr
Chart Drive: pulse motor drive
Chart Speed Accuracy: ±0.1%
Recording Modes: Normal, print on alarm, chart speed/interval changes at set alarm
Standard Printing Functions: engineering units (up to 6 alphanumerics), tag number (up to 7 alphanumerics), alarms (channel number, alarm types, and the time of alarm On/Off), scale markings (0/100%, 0/50/100%, or 20% steps), program list, manual, message (max. 16 characters), and header (60 characters x 5 lines)

Display: 5 x 7 dot matrix, 3 row, vacuum fluorescent; 1st row 22 large, 2nd & 3rd 40 small characters
Data Display: measured data (tag number, channel number, alarm status, measured value, engineering unit), bargraph, clock, alarm status, relay status, programming data, battery status, and recording format (Trend/Log)
Scaling Range: -30,000 to +30,000
Calculation: Difference between any channels or moving average for every 2 to 64 scans

Internal Memory: 10 yr lithium battery back up; 512 KB SRAM with floppy disc drive option
Optional Memory: 3.5 inch floppy; 1.4 MB or 720 K
Alarms: up to 4/channel
Outputs: 12 max with -A4 & -R1 opt
Alarm Types: high (H), low (L), high rate of change (RH), low rate of change (RL), delta high (H) and delta low (L)
Recording: Trend mode: CH# alarm types, and On/Off times in the right margin; logging mode: CH# and alarm types at the start of measured data
Alarm Acknowledgement: pressing the ACK key stops the alarm display flashing and resets the dedicated common relay output
Alarm Reset: hold type relay output by pressing the RESET key
Display: flashing display can be obtained for 20 point alarm status (channels 1 to 20) plus one common point for computing channels (channels 31 to 60)

Ambient Operating Temperature: 5 to 40°C (40 to 104°F) Humidity Range: 20 to 80%
Power Supply: 90 to 250 Vac, 50 or 60 Hz ±2%
Power Consumption: approx 130 VA
Clock: with calendar function
Input Terminals: clamped input terminal block (standard) and screw input terminal block (optional)
Mounting: desktop or flush panel MOST mounting (can be inclined up to 30° backward from vertical)
Dimensions: 221 H x 338 W x 335 mm D (834 x 13516 x 13316")
Weight: 9.3 kg (20.5 lb) approx.

Alarm Outputs (-A4 option): 10 points, contact rating 30 Vdc or 250 Vac, 2 A resistive. AND, OR, REFLASH, or latching option type output
Remote Control (-R1 option): Through the contact input, start/stop, chart speed/interval change, manual printout, message recording, digital recording in the trend mode, writing on the memory card, and loading trigger available. Input signal; TTL-level, open collector, and contact status,. plus 2 alarm outputs.
GPIB Interface (-C1 option): conforms to IEEE standard 488-1978
RS-232C Interface (-C2 option): conforms to EIA RS-232C
Computation (-M1 option):
Functions: +, -, x, =, SQR (square root), ABS (absolute value), LOG (common logarithm), EXP (exponential), logic (AND, OR, NOT, XOR), CLOG & TLOG (group or channel; max, min, avg, totals, max minus min)
Software: Runs on Windows95, 98 or NT 4.0.
Input Type
and Range
(Digital Display and Printout)
±20.000 mVdc
±60.00 & ±200.00
±2.0000 Vdc
±6.000 & ±20.000
±50.00 Vdc
±(0.05% of rdg + 5 digits)
±(0.05% of rdg + 2 digits)
±(0.05% of rdg +2 digits)
±(0.05% of rdg +2 digits)
±(0.05% of rdg +2 digits)
1 µV
10 µV
100 µV
1 mV
10 mV
R 0 to 1760°C
S 0 to 1760°C
B 0 to 1820°C
±(0.05% of rdg + 1°C)
however: R,S: 0 to 100°C ±3.7°C
100 to 300°C ± 1.5°C
and B: 400 to 600°C ± 2°C
K -200 to 1370°C± (0.05% of rdg + 0.7°C)
however: -200 to -100°C
± (0.05% of rdg + 1°C)
E -200 to 800°C
J -200 to 1100°C
T -200 to 400°C
J DIN (L) -200 to 900°C
T DIN (U) -200 to 400°C
±(0.05% of rdg + 0.5°C)
however: J, L DIN: -200 to -100°C
±(0.05% of rdg + 0.7°C)
Kp vs Au7Fe 0 to 300K±(0.05% of rdg + 0.7K)0.1K
N 0 to 1300°C±(0.05% of rdg + 0.7°C)0.1°C
C (W) 0 to 2315°C±(0.05% of rdg + 1°C)
PT100 -200 to 600°C±(0.05% of rdg + 0.3°C)0.1°C
PT100 -140 to 150°C±(0.05% of rdg + 0.3°C)0.01°C
Ni100/120 -60 to 180°C±(0.05% of rdg + 0.3°C)0.1°C
Cu10Ω -200 to 300°C±(0.2% of rdg + 0.7°C)0.1°C

Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Stock: 1 semana  
20-input hybrid recorder
Consult Sales  
10-input hybrid recorder
20-input hybrid recorder
Stock: 1 semana  
Z-fold paper, 20 m (65')
Stock: 1 semana  
Ten-colour printing ribbon
Stock: 1 semana  
RS232 Module for DR130 (Field Installable)
All amounts shown in EUR, GBP, or USD
Notas: Each recorder comes with one (20 m) Z-fold chart, one 10-colour ribbon and complete operator's manual. All units may have display with °F/°C and 50 Hz option field selectable. Only one communications option per unit. Other options can be combined as required. Floppy drive units include free conversion software.


Descargar DR130,DR230,DR240 Series - Recorder (NOTE:LARGE File 14 mb)
Descargar DR130, DR230, DR240 SERIES - Conversion Software
Descargar DR130, DR230 and DR240 Series - Communication Interface