Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121

FV500C

Vortex Flowmeters | FV500C

Vortex Flowmeters

  • Custom Built to Order - Consult Sales
  • SSP (Spectral Signal Processing) Technology
  • Measures Steam, Gas, and Low Viscosity Liquids
  • Clear Parallel Two-Line LCD Display. Displays Simultaneous Flow Rate and Total Along with Process Diagnosis
  • New, Compact Amplifier Housing: Lighter, Small and Easier to Handle
  • No Start-Up Tuning
  • Low Flow Stability
  • Advanced Self-Diagnostics
  • No Moving Parts
  • Simultaneous Analogue and Pulse Outputs (Pulse requires Display)
  • Status Output (Flow Switch Function) or Alarm Output
  • Configurable Through Local Display Interface
  • High Accuracy: ±0.75% of Reading (Liquid), ±1% of Reading (Gas, Steam)
Caudalímetros a emisión de vórtices y tubos de Pitot - Ver productos relacionados

Descripción

THIS PRODUCT REQUIRES YOU TO CONSULT WITH SALES PRIOR TO ORDERING
Please be prepared to complete the Vortex/Pitot Tube Order Questionaire so you can fax or email it to our sales department.


OMEGA’s FV-500C Series vortex flowmeter provides accurate, reliable, low-maintenance flow measurement. Vortices generated by the flowing fluid stress the shedder bar in pulses, and the shedder bar transmits the stress pulses to the encapsulated piezoelectric sensor.

Please contact Omega sales department to size the vortex flow meter for your application.

All the vortex meters are custom built to order. A display is highly recommended for any fine tuning adjustments required.


Based on the field proven sensor technology of the FV-500C Series vortex flowmeters, FV-500C features a new amplifier with proprietary spectral signal processing (SSP) technology to analyze the vortex waveform into its spectral components to filter noise from signal for the most stable measurement possible.

The FV-500C Series will provide excellent vibration immunity for stable, accurate measurements at low flows without any need for start-up tuning. The user benefits through greater reliability, reduced maintenance and a lower total cost of ownership.

The programmable display allows access to the full power of OMEGA’s new intelligent amplifier. The display is required if you would like to access the pulse output programming. The display is highly recommend if an adjustment or tweaking is required for the flow measurement application. The display also permits the user to display flow rate and/or total in engineering units for liquids and gases. Rate and total are displayed simultaneously. If the density or enthalpy of the fluid is constant (i.e. the temperature and pressure do not change), the density value can be entered into the meter to display in kilograms, pounds or metric tons; the enthalpy value can be entered to display in BTUs, kilojoules, etc. Analog output span adjustment and low cutoff are also settable from the display, there is no need to adjust pots. The analog and pulse outputs can also be forced to output from 0 to 100% FS or 0 to 6000 Hz without any flow through the meter as a test of the amplifier. For steam flow measurement, the FV-500C can be used with the OMEGA™ FC-20 mass flow computer. The standard FV-500C is wafer-style to slip between 150# ANSI flanges, and comes supplied with extra long bolts for installation. Units with the suffix “-F” have 150# ANSI flanges.

Model No.
(Without Display Module)
Description Lay Length
(mm/inches)
Weight
(kg/lbs)
FV-505C1/2" wafer mount70 (2.8)2.8 (6)
FV-505C-F1/2" flange mount70 (2.8)2.8 (6)
FV-510C1" wafer mount70 (2.8)3.7 (8)
FV-510C-F1" flange mount70 (2.8)3.7 (8)
FV-515C1 1/2" wafer mount70 (2.8)4.3 (9.5)
FV-515C-F1 1/2" flange mount70 (2.8)4.3 (9.5)
FV-520C2" wafer mount75 (3.0)6 (14)
FV-520C-F2" flange mount75 (3.0)6 (14)
FV-530C3" wafer mount100 (3.9)9.4 (21)
FV-530C-F3" flange mount100 (3.9)9.4 (21)
FV-540C4" wafer mount120 (4.7)12.8 (28)
FV-540C-F4" flange mount120 (4.7)12.8 (28)
FV-560C-F6" flange mount270 (10.6)36.4 (80)
FV-580C-F8" flange mount310 (12.2)55.4 (122)
FV-591C-F10" flange mount370 (14.6)90 (199)
FV-592C-F12" flange mount400 (15.7)140 (308)


THIS PRODUCT REQUIRES YOU TO CONSULT WITH SALES PRIOR TO ORDERING
Please be prepared to complete the Vortex/Pitot Tube Order Questionaire so you can fax or email it to our sales department.
Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Cant.
Descripción
DY015-DBMAA1-2D/FF1
Consult Sales  
Stock: 
 
 
1/2" Wafer Style Vortex Flowmeter W/Display
DY015-DBMAA1-2N/FF1
Consult Sales  
Stock: 
 
 
1/2" Wafer Style Vortex Flowmeter
DY015-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
1/2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY015-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
1/2" ANSI class 150 Flange Vortex Flowmeter
DY025-DBMAA1-2D/FF1
Consult Sales  
Stock: 
 
 
1" Wafer Style Vortex Flowmeter W/Display
DY025-DBMAA1-2N/FF1
3,377.00
Stock: 14 semanas
 
1" Wafer Style Vortex Flowmeter
DY025-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
1" ANSI class 150 Flange Vortex Flowmeter W/Display
DY025-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
1" ANSI class 150 Flange Vortex Flowmeter
DY040-DBMAA1-2D/FF1
Consult Sales  
Stock: 
 
 
1 1/2" Wafer Style Vortex Flowmeter W/Display
DY040-DBMAA1-2N/FF1
Consult Sales  
Stock: 
 
 
1 1/2" Wafer Style Vortex Flowmeter
DY040-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
1 1/2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY040-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
1 1/2" ANSI class 150 Flange Vortex Flowmeter
DY050-DBMAA1-2D/FF1
Consult Sales  
Stock: 
 
 
2" Wafer Style Vortex Flowmeter W/Display
DY050-DBMAA1-2N/FF1
Consult Sales  
Stock: 
 
 
2" Wafer Style Vortex Flowmeter
DY050-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY050-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
2" ANSI class 150 Flange Vortex Flowmeter
DY080-DBMAA1-2D/FF1
Consult Sales  
Stock: 
 
 
3" Wafer Style Vortex Flowmeter W/Display
DY080-DBMAA1-2N/FF1
Consult Sales  
Stock: 
 
 
3" Wafer Style Vortex Flowmeter
DY080-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
3" ANSI class 150 Flange Vortex Flowmeter W/Display
DY080-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
3" ANSI class 150 Flange Vortex Flowmeter
DY100-DBMAA1-2D/FF1
Consult Sales  
Stock: 
 
 
4" Wafer Style Vortex Flowmeter W/Display
DY100-DBMAA1-2N/FF1
Consult Sales  
Stock: 
 
 
4" Wafer Style Vortex Flowmeter
DY100-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
4" ANSI class 150 Flange Vortex Flowmeter W/Display
DY100-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
4" ANSI class 150 Flange Vortex Flowmeter
DY150-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
6" ANSI class 150 Flange Vortex Flowmeter W/Display
DY150-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
6" ANSI class 150 Flange Vortex Flowmeter
DY200-DBMBA1-2D/FF1
Consult Sales  
Stock: 
 
 
8" ANSI class 150 Flange Vortex Flowmeter W/Display
DY200-DBMBA1-2N/FF1
Consult Sales  
Stock: 
 
 
8" ANSI class 150 Flange Vortex Flowmeter
DY250-DBLBA1-2D/FF1
Consult Sales  
Stock: 
 
 
10" ANSI class 150 Flange Vortex Flowmeter W/Display
DY250-DBLBA1-2N/FF1
Consult Sales  
Stock: 
 
 
10" ANSI class 150 Flange Vortex Flowmeter
DY300-DBLBA1-2D/FF1
Consult Sales  
Stock: 
 
 
12" ANSI class 150 Flange Vortex Flowmeter W/Display
DY300-DBLBA1-2N/FF1
Consult Sales  
Stock: 
 
 
12" ANSI class 150 Flange Vortex Flowmeter
Accessories
DYC-1-CF
Consult Sales  
Stock: 
 
 
100 Foot Cable
DYC-1-1F
Consult Sales  
Stock: 
 
 
10 Foot Cable
DYC-1-3F
Consult Sales  
Stock: 
 
 
30 Foot Cable
DYC-1-5F
Consult Sales  
Stock: 
 
 
50 Foot Cable
DYC-1-7F
Consult Sales  
Stock: 
 
 
70 Foot Cable
DYA-D2N
Consult Sales  
Stock: 
 
 
Integral to Remote Electronics
DYA-D2D
Consult Sales  
Stock: 
 
 
Integral to Remote Electronics Display
Todos los precios se muestran en EUR
Notas: Comes with complete operators manual.
Note: Units with “ -F” suffix have 150 class flange connections.
For units with a display, add “-D” to the part number
For units with remote electronics, add “-R” to the part number and order the mounting kit and cable below.
For units designed for high temperature use, add “-HT” to the model number.
For NIST traceable calibration add “–NIST” to model
Contact sales for additional pricing of options.

Units require a display to access pulse output programmability.


We noticed you are from the US. Visit your local site for regional offers and live support.