Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121
Layer N Banner

High Temperature Constant Wattage Heating Cable

KE Series

High Temperature Constant Wattage Heating Cable | KE Series

High Temperature Constant Wattage Heating Cable

9,10 KE4-120

  • Continuous Exposure Rating up to 500°F
  • Low Watt Density
  • Parallel Resistance Heater
  • Cut-to-Length at the Job Site
  • Constant Watt Density
  • All Common Voltages Available
  • Moisture and Chemical Resistance
  • Continuous Electrical Ground
  • Designed for freeze protection and process temperature maintenance.
Sistemas de cables de calefacción eléctricos - Ver productos relacionados

Descripción

Click on this link if you need more information about Industrial Heaters.

The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.

OMEGALUX™ KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

Max. Circuit Length**-KE Series
Power 120V 208V 240V 277V 480V
4 Watts/ft349"606"699"806"1398"
8 Watts/ft247"428"494"570"988"
12 Watts/ft202"350"403"466"807"
Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Cant.
Descripción
4 WATTS/FT
KE4-120
9.10
Stock: 10 semanas
 
high temperature, constant wattage cable, 4 W/FT, 120V
KE4-240
19.27
Stock: 1 semana
 
high temperature, constant wattage cable, 4 W/FT, 240V
8 WATTS/FT
KE8-240
18.89
Stock: 10 semanas
 
high temperature, constant wattage cable, 8 W/FT, 240V
12 WATTS/FT
KE12-120
9.28
Stock: 11 semanas
 
high temperature, constant wattage cable, 12 W/FT, 120V
KE12-240
19.27
Stock: 11 semanas
 
high temperature, constant wattage cable, 12 W/FT, 240V
Accessories
KE-UC-KIT
€60.54
Stock: 1 semana
 
Termination Kit (for KE Series) One power input and two end terminals.
KE-KC-KIT
€59.37
Stock: 10 semanas
 
Termination Kit (for KE Series) Five end pouches and Five lead pouches. Five circuit kit.
FE-UC-KIT
€57.95
Stock: 11 semanas
 
Termination Kit (for FE Series)
FE-KC-KIT
€62.23
Stock: 11 semanas
 
Termination Kit (for FE Series)
SK-KIT
€28.67
Stock: 10 semanas
 
Splice Kit
FE-SK-KIT
€42.20
Stock: 11 semanas
 
Splice Kit (for FE Series)
RTV-SS
€12.29
Stock: 10 semanas
 
Silicone Sealant
Todos los precios se muestran en EUR
Notas:
*Price per foot. When ordering specify desired length in feet. 25 foot minimum.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F. To complete your system the following accessories are recommended: (1) Termination kits for KE cable (see page B-30 for specifications), (2) control options - see Section P for a complete selection of controllers and thermostats.
We noticed you are from the US. Visit your local site for regional offers and live support.