OMEGA-FLO^® 2-way Zero Differential Solenoid Valves ½" to 2½" NPT

SV-350

OMEGA-FLO 2-way Zero Differential Solenoid Valves 1/2

Normally Closed
Zero-Differential Pressure Ideal for Gravity Feed Processes
Available in Brass or Stainless Steel
Process Temperature Range to
130°C (266°F)
dc Models Available

Válvulas - Ver productos relacionados

Descripción

Follow this link if you want to know more about solenoid valves.

SV-350 Series 2-way solenoid valves are internally piloted valves with diaphragm and forced lifting which open fully from 0 PSI pressure differential. The valves feature brass or stainless steel body with high flow rates, FKM seal material, and a temperature range from -10 to 130°C (14 to 266°F). The valves are ideal for neutral media such as water, compressed air, and hydraulic oil (viscosity approx. 2.3 x 10 -4 ft 2 /sec). Electrical connection is by conduit plug.

SPECIFICATIONS
Mounting Position: Any (preferably with solenoid system upright)
Max Ambient Temp: 54°C (130°F)
Operating Voltage: 120 Vac standard
Voltage Tolerance: ±10% Power Consumption in
Warm State:
Opening Time (ms): 100 to 1000
Closing Time (ms): 700 to 4000 (switching times are measured using water and are dependent on valve orifice size and fluid pressure and viscosity)
Cycling Rate: Approx. 10 to 20 cpm
Duty Cycle: Continuous (100%)

† Todos los precios se muestran en EUR
Notas: Add the following suffix at no additional charge: "-24VDC" for 24 Vdc operation,"-12VDC" for 12 Vdc operation, "240 VAC" for 240 Vac operation, "-Buna" for Buna-N seals.
All units come with complete operator's manual.
* The SV-357, SV-358, SV-359, and SV-350 are not UL listed.

OMEGA-FLO® 2-way Zero Differential Solenoid Valves ½" to 2½" NPT

SV-350

OMEGA-FLO^® 2-way Zero Differential Solenoid Valves ½" to 2½" NPT