Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121
Layer N Banner

304SS Liquid Turbine Flow Meter, Pulse Output

FTB-900 Series

304SS Liquid Turbine Flow Meter with Pulse Output
 | FTB-900 Series

304SS Liquid Turbine Flow Meter with Pulse Output

987,31 FTB-910-P

CE
  • The sensor is of hard alloy bearing thrust type, which may guarantee the precision and improve the wear resistance performance as well.
  • Simple and firm structure, easy for installation and dismantling.
  • Wide range of measuring with very low lower flow velocity limit.
  • Small loss of pressure,fine repeat ability and high precision.
  • High resistance to electromagnetic interference and vibration.
Caudalímetros de turbina y rueda de paletas - Ver productos relacionados

Descripción

The FTB-900 Series is a low cost Liquid Turbine Flow Meter with an amplified square wave pulse output available in 12 sizes covering flow ranges between 0.176 to 880 GPM. The FTB-900 Series Turbine Flow Meters are designed to meet the demands of the most rigorous flow measurement applications. The meter features a 304 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and 316SS bearings. These materials help the meter to maintain accuracy and mechanical integrity when measuring the corrosive and abrasive fluids found in many industries.

When liquid flows through the casing of the sensor, the impulse of fluid will provide the blade with a rotation moment as there is an angle between the blade of the impeller and the flow direction. The blade will rotate as the friction moment and the fluid resistance are overcome, and it will reach a stable speed when the moments are at balance. Under certain conditions, the rotation speed of the blade will be in direct proportion to the flow velocity. Due to the magnetic conductivity of the blade, when located in the magnetic field generated by the signal detector (made of permanent magnet steel and coils), the rotating blade will cut the magnetic lines and periodically change the flux through the coil, thereby inducing electrical impulse signals at both ends of the coil. The induced signals, after being amplified and rectified will form a continuous rectangular impulse wave with certain amplitude which may be remotely transmitted to a display instrument indicating the instant flow and the cumulative flow of fluid. Within a certain range of flow, the impulse frequency f is in direct proportion to the instant flow of fluid flowing through the sensor.
Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Cant.
Descripción
FTB-904-P
987,31
Stock: 1 semana
 
1/2" Turbine Flow Meter, 304SS, Pulse Output, 1.76 GPM
FTB-906-P
987,31
Stock: 1 semana
 
1/2" Turbine Flow Meter, 304SS, Pulse Output, 2.64 GPM
FTB-910-P
987,31
Stock: 6 semanas
 
1/2" Turbine Flow Meter, 304SS, Pulse Output, 6.6 GPM
FTB-915-P
1.073,44
Stock: 6 semanas
 
1" Turbine Flow Meter, 304SS, Pulse Output, 35 GPM
FTB-930-P
1.142,93
Stock: 6 semanas
 
1-1/2" Turbine Flow Meter, 304SS, Pulse Output, 66 GPM
FTB-940-P
1.276,78
Stock: 6 semanas
 
2" Turbine Flow Meter, 304SS, Pulse Output, 88 GPM
FTB-960-P
1.902,29
Stock: 6 semanas
 
3" Turbine Flow Meter, 304SS, Pulse Output, 308 GPM
FTB-970-P
1.902,29
Stock: 6 semanas
 
3-1/2" Turbine Flow Meter, 304SS, Pulse Output, 440 GPM
FTB-980-P
2.444,85
Stock: 6 semanas
 
4-1/2" Turbine Flow Meter, 304SS, Pulse Output, 880 GPM
Todos los precios se muestran en EUR
We noticed you are from the US. Visit your local site for regional offers and live support.