€49,72 A/100-2W-INW-4-PB
Descripción
Sensor Type | Sensor Curve: | Platinum RTD | PTC (Positive Temperature Coefficient) |
---|---|
Number Sensing Points: | One |
Number Wires: | A/100-2W-I Series and A/1K-2W-I Series: Two (Non-Polarity Sensitive) A/100-3W-I Series and A/1K-3W-I Series: Three (Polarity Sensitive) |
Sensor Output @ 0°C (32°F): | A/100-xW-I Series: 100 Ohms nominal | A/1K-xW-I Series: 1000 Ohms nominal |
Sensor Accuracy: | +/- 0.06% Class A (Tolerance Formula: +/- °C = (0.15°C + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC) -40°C (-40°F): +/- 0.23°C (+/- 0.414°F) | 0°C (32°F): +/- 0.15°C (+/- 0.27°F) 200°C (392°F): +/- 0.55°C (+/- 1.00°F) |
Din Standard | Temperature Coeffcient: | DIN EN 60751 (IEC 751) | 3850 ppm / °C |
Stability: | +/- 0.03% after 1000 Hours @ 300°C (572°F) |
Response Time (63% Step Change): | 8 Seconds nominal |
Self-Heating | Maximum Operating Current: | 100 Ohm RTD: 7 mW/°C (Still Air) | 5 mA 1K Ohm RTD: 4mW/°C (Still Air) | 3 mA |
Operating Temperature Range: | -40 to 200°C (-40 to 392°F) |
Storage Temperature Range: | -40 to 85°C (-40 to 185°F) |
Operating Humidity Range: | 10 to 95% RH, non-condensing |
Probe Diameter: | 0.250" (6.35mm) |
Probe Material: | 304 Stainless Steel |
Thermowell Material | Bore Diameter: | 304 Series Stainless Steel | 0.260" |
Thermowell Instrument Thread | Process Thread: | 1/2" NPS (National Pipe Straight) Female Thread | 1/2" NPT) (National Pipe Tapered) Male Thread |
Fitting Material | Flammability Rating: | Polyamide 66 (High Performance Nylon 66) | UL94-HB |
Foam Pad Material | Flammability Rating: | Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C |
Sensor Threads: | 1/2" NPS (National Pipe Straight) Male Thread |
Lead Length | Conductor Size: | 14" (35.6 cm) | 22 AWG (0.65mm) |
Lead Wire Insulation | Wire Rating: | Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E) |
Conductor Material: | Silver Plated Copper |
Agency Approvals: | CE, RoHS, WEEE |