Cookies de la web de Omega Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.
Para obtener más información acerca de las cookies, por favor haga clic aquí
Haga clic en el siguiente link si quiere mas información sobre los tipos de acelerómetro.
The ACC141 Series are linear accelerometers
that produce a high level output proportional to the
instantaneous acceleration from static to 3000 Hz
(depending upon range). The excellent dynamic response
is enabled by using air damping which has much better
temperature properties than fluid damping. The rugged
capacitive sensor allows the high overload properties
and delivers excellent accuracy and long term stability.
The rugged stainless steel case with O-ring seal provides
excellent environmental protection and the integral base
plate make installation and mounting quick and isolates
the unit from mounting strain.
Specifications Linearity: ±1.0% full scale Hysteresis: 0.10% Repeatability: 0.05% Transverse Acceleration Effect: <±0.012 G/G Damping: Approximates 2nd order system with 0.7 critical damping [gas squeeze film 0.7±0.2 of critical at 25°C (77°F)]; damping ratio increases approximately 0.27%/°C Frequency Band: Flat from static to approximately 60% of natural frequency (all ranges) Resolution: Infinite, limited only by noise level Operating Temperature: -23 to 65°C (-10 to 150°F) Zero Shift: <±0.036% range/°C (<±0.02% range/°F) Sensitivity Shift: <±0.036% range/°C (<±0.02% range/°F) (slightly higher effect when “A” models are operated at excitation levels below 10 Vdc) Zero G Output: <±25 mV Full Scale G Output: <±25% nominal output Noise Level: <±0.01% nominal range (RMS) Calibration: Each unit is supplied with a computer generated plot of output vs acceleration at the specified output voltage Sensitivity: Reported at the nominal range Calibration Voltage: ACC141A: 10 Vdc ACC141B: 24 Vdc Excitation Voltage Range: 3-wire circuit ACC141A: 5 to 15 Vdc @ 5 mA (Cal at 10 Vdc) ACC141B: 10 to 28 Vdc @ 10 mA (Cal at 24 Vdc) Nominal Output: ACC141A: ±500 mV ACC141B: ±1000 mV Electrical Connection: 3 m (10') cable Case: Stainless steel, O-ring Weight: 30 g (1 oz)
† Todos los precios se muestran en EUR Notas: Comes complete with computer generated plot of output vs acceleration and operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.