AC Powered Potentiometer Input DIN Rail Signal Conditioner

DRI-PT

Pot Input Transmitter

^€436,47 DRI-PT

REALIZAR PEDIDO

3-Way Isolation, Eliminates Earth Loop Issues
Accepts Potentiometers from 100 Ω to 100 kΩ
Universal AC Power 85 to 265 Vac
Wide Ranging Zero and Span
Plug-In Terminals

Instrumentos de medición y control de proceso - Ver productos relacionados

Descripción

The DRI-PT is a DIN rail mount, potentiometer input, signal conditioner with 1800 Vdc isolation between AC power and the input/output circuitry. The input provides a constant voltage and is designed to accept any 3-wire potentiometer from 100 Ω to 100 kΩ. The output is switch selectable for a 0 to 5V, 0 to 10V, 0 to 1 mA, 0 to 20 mA or 4 to 20 mA DC signal.

Up to 80% adjustment of offset and gain is available to transmit a full scale output from any 20% portion of the potentiometer input.

The DRI-PT is useful in transmitting process control set-points to remote PID controllers or interfacing position or level sensors to data acquisition and control systems. The high density DIN rail mounting offers an extremely compact solution for saving valuable panel space.

In a valve positioning application a potentiometer is sometimes used as a feedback signal. Quite often a wide open valve is only a 25% turn of the feedback potentiometer. The DRI-PT can easily be adjusted to provide a full scale output signal (e.g. 4 to 20 mA) representing 0 to 25% or even 50 to 75% of the potentiometer input.

The factory default configuration for the DRI-PT is as follows:

Input Range: 0 to 100%
Output: 4 to 20 mA

Specifications
POTENTIOMETER INPUT
End-to-End Resistance: 100 Ω up to 100 kΩ
Input Impedance: >1 MΩ
Input Excitation: 500 mV, 5 mA maximum drive
Zero Turn-Up: 80% of full scale input
Span Turn-Down: 80% of full scale input
Common Mode Rejection: 1800 Vdc (input to power)

OUTPUT
Voltage Output:
    Range: 0 to 5V, 0 to 10V (dip-switch selectable)
    Source Impedance: <10 Ω
    Drive: 10 mA max (1 kΩ min @ 10V)
Current Output:
    Range: 0 to 1 mA, 0 to 20 mA, 4 to 20 mA (dip-switch selectable)
    Source Impedance: >100 kΩ
Compliance:
        0 to 1 mA: 7.5V max (7.5 kΩ max)
        0 to 20 mA: 12V max (600 Ω max)
        4 to 20 mA: 12V max (600 Ω max)
Accuracy (Including Linearity, Hysteresis): ±0.1% maximum at 25°C
Temperature Stability: <±0.05%/°C maximum of full scale range
Response Time (10 to 90%): <200 msec, typical
Common Mode Rejection: 120 dB @ DC, >100 dB @ 60 Hz
Isolation: 1800 Vdc between line power and input, output
LED Indication (Green): Active DC power
Humidity (Non-Condensing):
    Operating: 15 to 95% RH @ 45°C
    Soak: 90% RH for 24 hours @ 65°C
Temperature Range:
    Operating: 0 to 55°C
    Storage: -25 to 70°C
Power: 100 to 240 Vac, ±10%, 50 to 400 Hz; 1.5 W typical, 2.5 W max
Weight: 218 g

Realizar Pedido(Especifique el número de modelo)

Número de pieza/Desc.

Cant.

Descripción

DRI-PT

€436,47

Stock: 9 semanas

AC powered potentiometer input DIN rail signal conditioner

Accessories

ACPB-2

€47.06

Stock: 9 semanas

AC power distribution bus for 2 modules

ACPB-4

€105.71

Stock: 1 semana

AC power distribution bus for 4 modules

ACPB-8

€144.26

Stock: 9 semanas

AC power distribution bus for 8 modules

† Todos los precios se muestran en EUR
Notas: An ACPB power rail is required to power the modules and is ordered separately.