2-Piece Mica Insulated Band Heater

MB-2 SERIES

^€164,16 MB3J1J2P1

REALIZAR PEDIDO

3 1 /2 -10 1 /2 " Barrel Dia.
500-2,000 Watts
240-480 Volt
21-40 W/In 2
Up to 900°F Max. Sheath Temperature
Up to 750°F Max. Barrel Temperature
Heavy Duty Anti-Torque Post Terminals (Type P)

Calentadores de banda - Ver productos relacionados

Descripción

FEATURES
Efficient Heat Transfer is provided by high quality nickel chromium resistor wire wound on a selected mica strip and enclosed in a die-formed aluminum coated steel sheath.
Long-Term Durability is assured by non-hygroscopic mica insulation.
Uniform Fit to ± 1/16" because of low expansion stainless steel clamping band, which assures maximum heat distribution.
Easy to Apply due to two-piece construction. Each heater is rated 240V. Connect in series for 480V; parallel for 240V.
Heavy Duty Stainless Steel Post Terminals complete with hardware, are designed to prevent excess torsion during tightening of connections. Standard #10-32 threads.
Reliable Performance and Quick Temperature Response

Watts	Volts	W/In2	Dimensions (In.)		Model No.	Wt. (Lb.)
Watts	Volts	W/In2	Barrel Dia.	Heater Width	Model No.	Wt. (Lb.)
500	240/480	30	3 1/2	1 1/2	MB3J1J2P1	0.7
700	240/480	37	4	1 1/2	MB4A1J2P1	0.8
800	240/480	32	4	2	MB4A2A2P1	0.8
750	240/480	35	4 1/2	1 1/2	MB4J1J2P1	0.8
600	240/480	27	4 3/4	1 1/2	MB4N1J2P1	0.8
900	240/480	39	4 7/8	1 1/2	MB4Q1J2P1	0.8
700	240/480	30	5	1 1/2	MB5A1J2P1	0.9
900	240/480	38	5	1 1/2	MB5A1J2P2	0.9
900	240/480	36	5 1/4	1 1/2	MB5E1J2P1	0.9
800	240/480	31	5 1/2	1 1/2	MB5J1J2P1	0.9
850	240/480	30	6	1 1/2	MB6A1J2P1	1
1,000	240/480	35	6	1 1/2	MB6A1J2P2	1
750	240/480	25	6 1/4	1 1/2	MB6E1J2P1	1
950	240/480	31	6 1/2	1 1/2	MB6J1J2P1	1
1,200	240/480	39	6 1/2	1 1/2	MB6J1J2P2	1
1,000	240/480	24	6 1/2	2	MB6J2A2P1	1
1,000	240/480	31	6 3/4	1 1/2	MB6N1J2P1	1
1,000	240/480	30	7	1 1/2	MB7A1J2P1	1.2
1,000	240/480	29	7 1/4	1 1/2	MB7E1J2P1	1.2
900	240/480	20	7 1/4	2	MB7E2A2P1	1.3
1,200	240/480	35	7 3/8	1 1/2	MB7G1J2P1	1.2
1,000	240/480	28	7 1/2	1 1/2	MB7J1J2P1	1.2
1,200	240/480	34	7 1/2	1 1/2	MB7J1J2P2	1.2
1,000	240/480	27	7 3/4	1 1/2	MB7N1J2P1	1.2
1,000	240/480	27	7 7/8	1 1/2	MB7Q1J2P1	1.2
1,100	240/480	35	8	1 1/4	MB8A1E2P1	1.4
1,000	240/480	27	8	1 1/2	MB8A1J2P1	1.4
1,300	240/480	35	8	1 1/2	MB8A1J2P2	1.4
1,200	240/480	30	8 1/2	1 1/2	MB8J1J2P1	1.5
1,400	240/480	35	8 1/2	1 1/2	MB8J1J2P2	1.5
1,600	240/480	30	8 1/2	2	MB8J2A2P1	1.5
1,300	240/480	31	9	1 1/2	MB9A1J2P1	1.6
1,500	240/480	35	9	1 1/2	MB9A1J2P2/	1.6
1,800	240/480	30	9 1/2	2	MB9J2A2P1	1.7
2,000	240/480	33	9 3/4	2	MB9N2A2P1	1.8
1,000	240/480	21	10	1 1/2	MB10A1J2P1	2.1
1,400	240/480	30	10	1 1/2	MB10A1J2P2	2.1
2,000	240/480	40	10 1/2	1 1/2	MB10J1J2P1	2.4

*Add /240 or /480 to model number to determine desired voltage.
Watt densities shown are based on heated area of contact surface only.

Realizar Pedido(Especifique el número de modelo)

Número de pieza/Desc.

Cant.

Descripción

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

MB2J2A1P1

€143.69

Stock: 8 semanas

450W,band heater

MB3E1J1P1

€122.35

Stock: 8 semanas

400W, band heater

MB3J1J2P1

€164.16

Stock: 8 semanas

500W, band heater

MB5A1J2P1

€180.67

Stock: 8 semanas

700W, band heater

MB5E1J2P1

€192.93

Stock: 8 semanas

900W, band heater

MB7A1J2P1

€189.15

Stock: 8 semanas

1000W, band heater

MB7Q1J2P1

€203.42

Stock: 8 semanas

1000W,band heater

† Todos los precios se muestran en EUR

Referencia del fabricante

Construya su Referencia Abajo

	(1)	(2)	(3)	(4)		(5)
MB					2P

Descripciones de las opciones:

(1) Code in Part Number Seleccione:
3 para code 3
4 para code 4
5 para code 5
6 para code 6
7 para code 7
8 para code 8
9 para code 9
10 para code 10

(2) Code in Part Number Seleccione:
A para code A
E para code E
G para code G
J para code J
N para code N
Q para code Q

(3) Code in Part Number Seleccione:
1 para code 1
2 para code 2

(4) Code in Part Number Seleccione:
A para code A
E para code E
J para code J

(5) Code in Part Number Seleccione:
1 para code 1
2 para code 2

Notas: No todas las combinaciones pueden ser válidas. Verifique en la hoja de especificaciones para números de parte válidos