Metric Multiconductor Feedthroughs

MFT Metric Series

REALIZAR PEDIDO

Pressure or Vacuum Applications
Seals Multiple Thermocouples and Protection Tubes
Available in Both NPT and ISO T/BPST Mounting Threads
Up to 16 Probes in 1 Fitting
Blank Sealing Plugs Included
3 to 16 Probes
416 SS Body and Cap
316 SS Ferrules Standard
PTFE Ferrules Available
OMEGALOKR Ferrules Standard
1 to 6 mm (0.040 to 1.4") Probe Diameters

Sistemas de panel y conectores para termopar - Ver productos relacionados

Descripción

These all-new multiconductor feedthroughs are designed for applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy-duty 416 SS construction allows use of this fitting in high-pressure or vacuum applications. Probes between 0.040" and 1/4" in diameter can be used in these feedthroughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 for 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter, and 16 for 0.040" diameter probes.

All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.

Realizar Pedido(Especifique el número de modelo)

Número de pieza/Desc.

Cant.

Descripción

Thread is ISO/BPST

MFT-M10-3

€147.55

Stock: 4 semanas

1.0mm probe, 3 probes, 1/4in. Thread

MFT-M10-5

€180.48

Stock: 4 semanas

1.0mm probe, 5 probes, 1/4in. Thread

MFT-M10-6

€193.02

Stock: 4 semanas

1.0mm probe, 6 probes, 1/4in. Thread

MFT-M15-3

€135.75

Stock: 4 semanas

1.5mm probe, 3 probes, 1/4in. Thread

MFT-M30-3

€124.77

Stock: 4 semanas

3.0mm probe, 3 probes, 1/4in. Thread

Ordenar por número de referencia

Número de pieza

Cant.

Número de pieza

Cant.

† Todos los precios se muestran en EUR
Notas: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required, add suffix "-PTFE" to the model number shown in the Order By Part Number fields. Add additional cost per ferrule. One ferrule needed for each conductor.
Ordering Example: (1) MFT-M10-6 1.0mm probe, 6 probes, 1/4in. ISO/BPST Thread, €193.02

Referencia del fabricante

Construya su Referencia Abajo

	(1)	(2)
MFT

Descripciones de las opciones:

(1) Diameter of Probe Seleccione:
-M10 para 1.0mm
-M15 para 1.5mm
-M30 para 3.0mm
-M45 para 4.5mm
-M60 para 6.0mm

(2) Number of Probes Seleccione:
-3 para 3 probes
-5 para 5 probes
-6 para 6 probes
-8 para 8 probes
-10 para 10 probes
-12 para 12 probes
-16 para 16 probes

Notas: No todas las combinaciones pueden ser válidas. Verifique en la hoja de especificaciones para números de parte válidos