Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121
Layer N Banner

Explosion Resistant Drum Heaters

SEPDH Series

Explosion Resistant Drum Heaters | SEPDH Series

Explosion Resistant Drum Heaters

2.652,00 SEPDH-C-1300-120-T3

  • Factory Mutual Hazardous Area Approval
  • Class I, Div 2, Groups A,B, C, and D; Class II, Div 2, Groups F and G
  • Inherently Safe
  • Integral Built-In High-Limit Thermal Cutout** Prevents Temperature Runaway
  • Up to 21/2 Watts Per Square Inch
  • Exposure Temperature Up to 200°C (392°F)
Calentadores flexibles - Ver productos relacionados

Descripción

Click on this link if you need more information about Silicone heater elements or general information about industrial heater elements.

OMEGALUX™ silicone rubber area drum heaters are low-watt density electrical resistance heaters in blanket form. They are designed to provide a practical, efficient means of freeze protection, viscosity control, melting of solids, and maintaining materials at elevated temperatures in Class I, Division 2 areas.
OMEGALUX™ SEPDH drum heaters feature built-in high-limit thermal cutout protection, which, in the event of a primary temperature controller failure, maintains heater sheath temperature below the minimum safe auto-ignition temperature of the material being heated or materials in the area. OMEGALUX™ SEPDH drum heaters are compatible with most chemical fluids and oils used in field service. Unlike many other drum heaters, the SEPDH has a thin-line design that lets it fit between the drum and the cradle.

Insert Codes for model numbers
High-Limit Thermostat Temperature
T4A: 70°C (158°F)
T3 :145°C (292°F)
Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Cant.
Descripción
55 Gallon
SEPDH-C-1300-120-T3
2,652.00
Stock: 10 semanas
 
EXPLOSION-RESISTANT DRUM HEATER, 120V
SEPDH-C-1300-120-T4A
2,607.27
Stock: 10 semanas
 
DRUM HEATER
SEPDH-C-1300-240-T3
2,607.27
Stock: 10 semanas
 
DRUM HEATER
SEPDH-C-1300-240-T4A
2,704.00
Stock: 10 semanas
 
DRUM HEATER
30 Gallon
SEPDH-C-1000-120-T4A
2,600.00
Stock: 1 semana
 
EXPLOSION-RESISTANT DRUM HEATER, 120V
SEPDH-C-1000-120-T3
2,600.00
Stock: 10 semanas
 
EXPLOSION-RESISTANT DRUM HEATER, 120V
SEPDH-C-1000-240-T3
2,600.00
Stock: 10 semanas
 
DRUM HEATER
SEPDH-C-1000-240-T4A
2,600.00
Stock: 10 semanas
 
DRUM HEATER
Todos los precios se muestran en EUR
Notas: * Insert “High-Limit Thermostat Temperature” rating from above table. The maximum allowable sheath temperature (“T” rating) must be specified if drum heater is to be used in a Division II area. “C” specifies heaters with adjustable temperature control assembly and temperature ranges from -4 to 163°C (25 to 325°F).
** Article 501 of the NEC requires that the maximum sheath temperature of the heater shall not exceed 80 percent of the auto-ignition temperature of the surrounding atmosphere when heater is continuously energized.
Auto-Ignition Temperature: The minimum temperature required to initiate or cause selfsustained combustion of a solid, liquid or gas independently of the heating or heated element (see NFPA 325M, Fire Hazard Properties of Flammable Liquids, Gases, and Volatile Solids).
We noticed you are from the US. Visit your local site for regional offers and live support.