Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121

Heavy Duty Threaded Thermowell for 1/4 Inch Diameter Elements

SERIES 260HL

Heavy Duty Threaded Thermowell for 1/4 Inch Diameter Elements | SERIES 260HL

38,00 3/4-260HL-U21/2-BRASS

RoHS
  • Available in Carbon Steel and Stainless Steel
  • Standard Insertion Lengths from 2 1/2 to 19 1/2 Inches
  • 3/4 Inch and 1 Inch External NPT Thread
Vainas y asambleas de cabeza - Ver productos relacionados

Descripción

Application:
Standard length, 1/4" bimetal thermometers. #20 gage thermocouple elements. Unarmored liquid-in-glass test thermometers. Other temperature-sensing elements having .252 in. maximum diameter.

Connection Size:
3/4" NPT and 1" NPT are standard. Other thread sizes are available upon request.

Materials:
Brass (ASTM B-16), Carbon Steel (C-1018), Stainless Steel A.I.S.I. 304 & A.I.S.I. 316, Monel. Wells are also available in special materials; prices on request.


Series 260HL—Lagging Extension Type
All dimensions in inches.

* NPSM internal pipe thread will accept both NPT and NPS male threads.

Ext. Th'd PModel No.Lag. Ext.
T
Elem. Lgth.
A
Insert. Lgth.
U
Shank Dia.
Q
3/4" NPT3/4-260HL-U 2 1/2
        -U 4 1/2
        -U 7 1/2
        -U10 1/2
        -U13 1/2
        -U19 1/2
2
3
3
3
3
3
6
9
12
15
18
24
2 1/2
4 1/2
7 1/2
10 1/2
13 1/2
19 1/2
7/8
7/8
7/8
7/8
7/8
7/8
1" NPT1-260HL-U 2 1/2
      -U 4 1/2
      -U 7 1/2
      -U10 1/2
      -U13 1/2
      -U19 1/2
2
3
3
3
3
3
6
9
12
15
18
24
2 1/2
4 1/2
7 1/2
10 1/2
13 1/2
19 1/2
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16
1 1/16


Maximum Fluid Velocity—feet per second
Well Type Material Insertion Length – “U”
2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 16 1/2 19 1/2 22 1/2
3/4" - 260H
and
3/4" - 260HL
Brass305 (97.5)93.8 (54.1)33.917.110.5753.7
Carbon Steel386 (175)180 (97.2)65.3 (58.3)3320.113.49.67.1
A.I.S.I. 304 & 316440 (243)197 (135)71.2362214.70.57.8
Monel354 (195)155 (108)56.128.417.311.67.55.6
1" - 260H
and
1" - 260HL
Brass354 (161)108 (89.5)39.419.812.28.15.84.3
Carbon Steel448 (289)209 (161)75.738.423.315.511.18.2
A.I.S.I. 304 & 316490 (403)228 (225)82.541.825.517.112.29.1
Monel410 (322)179 (178)65.13320.113.58.76.5
Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore, represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.
Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Cant.
RoHS
Descripción
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
Quick Ship
3/4-260HL-U21/2-BRASS
38.00
Stock: 3 semanas
RoHS compliancy undetermined
Heavy Duty Thread Well, 3/4" NPT, 2 1/2 Insertion length, Brass
Quick Ship
3/4-260HL-U21/2-CS
38.00
Stock: 3 semanas
RoHS compliancy undetermined
Heavy Duty Thread Well, 3/4" NPT, 2 1/2 Insertion length, Carbon Steel
Quick Ship
1-260HL-U191/2-304SS
201.00
Stock: 5 semanas
RoHS compliant
Heavy Duty Thread Well, 1" NPT, 19 1/2 Insertion length, 304 SS
Todos los precios se muestran en EUR

Referencia del fabricante

Construya su Referencia Abajo
Descripciones de las opciones:


(1) External thread - NPT Seleccione:
3/4 para 3/4 in.
1 para 1 in.

(2) Insertion length dimension Seleccione:
21/2 para 2 1/2 in.
41/2 para 4 1/2 in.
71/2 para 7 1/2 in.
101/2 para 10 1/2 in.
131/2 para 13 1/2 in.
191/2 para 19 1/2 in.

(3) Material Seleccione:
304SS para 304 SS
316SS para 316 SS
CS para Carbon Steel
BRASS para Brass
Notas: No todas las combinaciones pueden ser válidas. Verifique en la hoja de especificaciones para números de parte válidos