Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121
Layer N Banner

Terminal Covers, Clamping Bands and Insulators

STRIP Heater Accessories

Terminal Covers, Clamping Bands and Insulators | STRIP Heater Accessories

Terminal Covers, Clamping Bands and Insulators

35,47 PCN255716

Descripción

Secondary Insulation Bushing: All types except NS. Must be used when strips are mounted for air heating only or when connected in series on line voltages above 480V. Note: To accommodate bushings, a 17 /32 " x 11 /16 " dia. mounting hole in tabs should be specified for heaters.

Strip Element Clamps: Cast-iron clamps for use with OMEGALUX ® strip elements, retain their strength at elevated temperatures to assure maximum sheath-to-surface contact. Resulting uniform efficient heat transfer from internal resistance wire to the heated material avoids hot spots on the element, contributing to long service life.

Type SC Clamping Bands: A permanently tight fit on cylinders, nozzles, pipes and other round surfaces is provided by the Type SC stainless steel band with alloy screw. For small pipe diameters, strip elements should have cross-section curving (contact OMEGALUX). For most satisfactory results, bands should be spaced about 5 inches apart and should be drawn up tight to assure good contact between heater or thermostat bulb and surface. Installation: Fasten studs to the work surface by welding, brazing or threading. Use correct size stud to fit clamp. (See sketches to left). For temperatures over 750°F, stainless steel studs are recommended. When tightening nuts, torsion should not exceed 10 foot pounds maximum. Heaters must be allowed to expand. One clamp should hold heater. Nuts on other clamp should be backed off approx. 1 /2 turn to allow heaters to expand.
Realizar Pedido(Especifique el número de modelo)

¿Qué compraron otras personas?: Cuando se muestre este icono, haga clic para expandir una lista de los productos que otras personas adquirieron al comprar ese modelo.

Número de pieza/Desc.
Cant.
Descripción
Terminal Covers and Insulator
Click to expand/minimize a list of what others bought with thePCN255716
PCN255716
35.47
Stock: 8 semanas
 
Secondary insulation bushing
Click to expand/minimize a list of what others bought with theH-TP
H-TP
33.59
Stock: 7 semanas
 
Ceramic post terminal insulators
  
OT-AC-1
48.99
Stock: 5 semanas
 
Terminal cover for OT series strip heaters
  
PT-AC-1
44.62
Stock: 5 semanas
 
Terminal cover for PT series strip heaters
  
SE-AC-1
43.62
Stock: 1 semana
 
Terminal cover for SE series strip heaters
Clamping Devices
  
SC-820-20
Consult Sales  
Stock: 
 
 
Clamping band
  
SC-820-30
Consult Sales  
Stock: 
 
 
Clamping band
  
SC-820-34
Consult Sales  
Stock: 
 
 
Clamping band
  
SC-820-40
Consult Sales  
Stock: 
 
 
Clamping band
  
SC-820-46
Consult Sales  
Stock: 
 
 
Clamping band
Todos los precios se muestran en EUR
We noticed you are from the US. Visit your local site for regional offers and live support.