OMEGAFLEX™ Low Density Polyethylene Tubing

TYPE

^€44,40 TYPE-1418-100

REALIZAR PEDIDO

Specific Gravity: .921
Hardness: 50 Shore D
Tensile Strength, PSI: 1600

Bombas y mezcladores - Ver productos relacionados

Descripción

Polyethylene tubing is not to be used with barbed fittings due to its tendency to form stress cracks. Use compression-type fittings instead.

Specifications
Specific Gravity: .921
Tensile Strength, psi: 1600 Hardness: 50 Shore D
Elongation at Break, %: 500
Brittle Temperature: -60°C (–76°F)
Maximum Operating Temperature: 60°C (140°F)

Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
Note: The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.

Realizar Pedido(Especifique el número de modelo)

Número de pieza/Desc.

Cant.

Descripción

TYPE-14170-500

€98,55

Stock: 1 semana

1/4 OD (in), 0.17 ID (in)

TYPE-1418-500

€174,51

Stock: 19 semanas

1/4 OD (in), 1/8 ID (in)

TYPE-516316-500

€182,82

Stock: 19 semanas

5/16 OD (in), 3/16 ID (in)

TYPE-516316-100

€44,40

Stock: 19 semanas

5/16 OD (in), 3/16 ID (in)

TYPE-3814-100

€57,45

Stock: En stock

3/8 OD (in), 1/4 ID (in)

TYPE-1238-100

€65,31

Stock: 1 semana

1/2 OD (in), 3/8 ID (in)

TYPE-1238-500

€268,31

Stock: 4 semanas

1/2 OD (in), 3/8 ID (in)

TYPE-5812-100

€66,61

Stock: 19 semanas

5/8 OD (in), 1/2 ID (in)

TYPE-3458-100

€66,61

Stock: 19 semanas

3/4 OD (in), 5/8 ID (in)

TYPE-7858-100

€113,98

Stock: 5 semanas

7/8 OD (in), 5/8 ID (in)

TYPE-134-100

€170,96

Stock: 19 semanas

1 OD (in), 3/4 ID (in)

TYPE-178-100

€92,61

Stock: 19 semanas

1 OD (in), 7/8 ID (in)

TYPE-1141-100

€182,82

Stock: 5 semanas

1 1/4 OD (in), 1 ID (in)

TYPE-134112-50

€485,90

Stock: 19 semanas

1 3/4 OD (in), 1 1/2 ID (in)

TYPE-1418-100

€44,40

Stock: 1 semana

1/4 OD (in), 1/8 ID (in)

† Todos los precios se muestran en EUR
Notas: Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.
Ordering Example: (1) TYPE-14170-500 1/4 OD (in), 0.17 ID (in) tubing, €98,55