OMEGABUS® Single channel data acquisition system & Digital Transmitters

D1000 and D2000

Single channel data acquisition system

^€338,61 D1101

REALIZAR PEDIDO

Single channel data acquisition system with isolated Inputs
Complete Sensor To RS-232C or RS-485 Interface
Input Modules for Thermocouples, RTDs, Voltages, Currents, Pulse and Frequency, and Bridge Inputs
RS-485 Format Permits Remote Communications Up to Four Thousand Feet
D2000 Series Provide Linearization of Non-Standard Sensors
Connect Up To 32 Modules On One Cable, Up to 124 Using a Repeater
Alarm Outputs Standard
Continuous Self Calibration, No Adjustment Requirements

Sistemas de adquisición de datos USB, RS232, RS485 y Ethernet - Ver productos relacionados

Descripción

The D1000 and D2000 Series single channel data acquisition system and digital transmitters are a complete family of easy to use interface modules for personal computers and other processor based equipment with standard serial I/O ports. The modules convert analog input signals to engineering units and transmit, in ASCII format, to any host computer with a standard RS-232C or RS-485 port. This modular design enables anyone familiar with a personal computer to construct a flexible and cost effective data acquisition system. These modules can measure temperature, pressure, flow, voltages, currents and various types of digital signals.
The D1000 series provide direct interface to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to engineering units.

Each module also provides digital I/O lines for controlling devices through solid state relays or TTL signals. These digital I/O lines along with integral limit setting capability provide alarm and control outputs. With the exception of the D1400 RTD and D1500 bridge modules, every D1000 module contains an on-board event counter. The event counter will count up to ten million transitions on the digital input line. All user selectable options (address, baud rate, alarms, etc.) are done through the communications port and stored in nonvolatile memory thereby eliminating switches or external adjustments of any kind.

The D2000 series of user programmable single channel data acquisition and control modules allow direct interface of non-linear analog sensors to computers with serial I/O ports. Use of these modules enables downloading up to 23 breakpoints through the communications port. With these breakpoints the user can program a module to virtually any transfer function.

Ranges for D1000 Modules

Digital Inputs/Outputs
RS-232 Output	RS485 Output	Description
D1701	D1702	7 Digital in 8 digital out
D1711	D1712	15 Digital in/out

Frequency, Time and Event Inputs
RS-232 Output	RS485 Output	Description
D1601	D1602	Frequency input
D1611	D1612	Timer input
D1621	D1622	Event counter

Thermocouple Inputs
RS-232 Output	RS485 Output	Input
D1311	D1312	J thermocouple
D1321	D1322	K thermocouple
D1331	D1332	T thermocouple
D1341	D1342	E thermocouple
D1321	D1322	K thermocouple
D1351	D1352	R thermocouple
D1361	D1362	S thermocouple
D1371	D1372	B thermocouple
D1381	D1382	C thermocouple

RTD Inputs
RS-232 Output	RS485 Output	Input Curve
D1411	D1412	0.00385
D1421	D1422	0.00392

Thermistor Inputs
RS-232 Output	RS485 Output	Description
D1451	D1452	2252 ohm thermistor

Current Inputs
RS-232 Output	RS485 Output	Input
D1211	D1221	10 mA
D1221	D1222	1 mA
D1231	D1232	100 mA
D1241	D1242	1 A
D1251	D1252	4 to 20 mA

Voltage Inputs
RS-232 Output	RS485 Output	Input
D1101	D1102	10 mV
D1111	D1112	100 mV
D1121	D1122	1 V
D1131	D1132	5 V
D1141	D1142	10 V
D1151	D1152	100 V

Bridge Inputs
RS-232 Output	RS485 Output	Description
D1511	D1512	30 mV input, 5V excitation
D1521	D1522	30 mV input, 10V excitation
D1531	D1532	100 mV input, 5V excitation
D1541	D1542	100 mV input, 10V excitation
D1561	D1562	1 to 6V input, 10V excitation

Ranges for D2000 Modules

Bridge Inputs
RS-232 Output	RS485 Output	Description
D2511	D2512	30mV input, 5V excitation
D2521	D2522	30mV input, 10V excitation
D2531	D2532	100mV input, 5V excitation
D2541	D2542	100mV input, 10V excitation

Frequency, Time and Event Inputs
RS-232 Output	RS485 Output	Description
D2601	D2602	Frequency input
D2611	D2612	Timer input
D1621	D1622	Event counter

Current Inputs
RS-232 Output	RS485 Output	Input
D2211	D2221	10 mA
D2221	D2222	1 mA
D2231	D2232	100 mA
D2241	D2242	1 A
D2251	D2252	4 to 20 mA

Voltage Inputs
RS-232 Output	RS485 Output	Input
D2111	D2112	100 mV
D2121	D2122	1 V
D2131	D2132	5 V
D2141	D2142	10 V

Software
A utility software package is available at no additional charge for the D1000 and D2000 family of products. This software provides program examples and a simple data logging program. The software may be downloaded from this web site from the "Software" link in the "Related Links" section at the bottom of this page.

Realizar Pedido(Especifique el número de modelo)

¿Qué compraron otras personas?: Cuando se muestre este icono, haga clic para expandir una lista de los productos que otras personas adquirieron al comprar ese modelo.

Número de pieza/Desc.

Cant.

Descripción

Example of the most popular part numbers are shown below. Use the Part Number Builder beneath this table to select your exact configuration

Accessories

D1000-C9

€37.01

Stock: 1 semana

Cable for connecting D1000 to serial port. 6ft cable with DB9 connector on one end and strip leads on the other end

† Todos los precios se muestran en EUR
Notas: Each unit is supplied with a CD ROM that includes a complete operator’s manual and Windows setup software. D1000 Series digital transmitters are also available with Modbus RTU protocol. To order transmitters Modbus RTU protocol, add suffix “M” at the end of the model number, no additional charge

Referencia del fabricante

Construya su Referencia Abajo

	(1)	(2)	(3)	(4)
D

Descripciones de las opciones:

(1) Model D1000 or D2000(programmable for non-linear functions) Seleccione:
1 para D1000
2 para D2000

(2) Input Type(see range tables above) Seleccione:
1 para voltage
2 para current
3 para thermocouple
4 para RTD/thermistor
5 para bridge
6 para frequency time and event
7 para digital I/O

(3) Input Range(see range tables above) Seleccione:
0 para range 0(module dependent)
1 para range 1(module dependent)
2 para range 2(module dependent)
3 para range 3(module dependent)
4 para range 4(module dependent)
5 para range 5(module dependent)
6 para range 6(module dependent)
7 para range 7(module dependent)
8 para range 8(module dependent)

(4) Output Seleccione:
1 para RS232
2 para RS485

Notas: No todas las combinaciones pueden ser válidas. Verifique en la hoja de especificaciones para números de parte válidos

Manuales del productos:

Descargar D1000 operator's manual

Descargar D1700 - OMEGABUS DIGITAL TRANSMITTERS Operators Manual

Descargar D2000 - OMEGABUS DIGITAL TRANSMITTER Operators Manual