Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121
Layer N Banner

 - Discontinued Rugged Pressure Transmitters

PXM209 and PXM219 Series

 | PXM209 and PXM219 Series

  • Pressure transmitter with 5 Point Calibration Certificate Included
  • Stainless Steel Fitting and Body
  • 0 to 10 Vdc or 4 to 20 mA Outputs
  • Solid State Media Isolation Suitable for Use with Many Industrial Liquids and Gases
  • Broad Temperature-Compensated Range of -20 to 80°C
  • Rugged High Shock and Vibration Design for Tough OEM Applications
Transductores de presión - Ver productos relacionados


Find how a Pressure Transducer works on this link or how we can customize your Pressure Sensor.

The PXM209/PXM219 series has been discontinued. Please see the PX309 series as a possible alternative or contact our Technical Sales department.

The pressure transmitter of the PXM209 Series general purpose are accurate, highly reliable general purpose voltage or current output transducers suitable for harsh industrial equipment applications. Their high performance is a result of the soild state full bridge construction which uses a micro-machined diffused silicon diaphragm and unique thin-film media with dielectric isolation barriers. The proprietary ASIC provides a wide temperature compensation including tight tolerances for zero balance and span.

0 to 10 Vdc Output
24 Vdc @ 15 mA (12 to 35 Vdc)
Output: 0 to 10 Vdc ±1.5% (3 wire)
Zero Balance: 0 Vdc ±2% FSO

4 to 20 mA Output
24 Vdc (7 to 35 Vdc)
reverse polarity protected
Output: 4 to 20 mA ±1% FSO (2 wire)
Zero Balance: 4 mA ±2% FSO
Max Loop Resistance:
50 x (supply voltage - 10)
Common Specifications

0.25% FS (including linearity, hysteresis and repeatability)
Operating Temperature: -54 to 121°C
Compensated Temperature: -20 to 80°C
Thermal Effects: 0.04% FS/%°C
Proof Pressure: 150%
Burst Pressure: 300% range max
Response Time: 2 ms typical
Vibration Sensitivity: At 20 g peak sinusoidal vibration from 10 Hz to 2000 Hz (12 mm D.A.), the
output shall not exceed 0.04% FS/g for 1 bar range to 0.005% FS/g for 7 bar and above
Natural Frequency: >35 kHz for 7 bar range
Gauge Type: Diffused silicon strain gauges
Wetted Parts: 316 SS, borosilicate glass, silicon nitride, epoxy
Pressure Port: G 1/4 A male
Electrical Connections:
PXM209: 1m screened 4-core cable
PXM219: DIN 40050 plug, mating connector supplied (IP65)
Weight: 128 g

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Consult Sales  
0 to 1 bar gauge pressure (relative), DIN Connector Style, 4-20mA Output
Consult Sales  
0 to 6 bar gauge pressure (relative), DIN Connector Style, 4-20mA Output
Consult Sales  
0 to 10 bar gauge pressure (relative), DIN Connector Style, 4-20mA Output
Consult Sales  
0 to 6 bar gauge pressure (relative), DIN Connector Style, 10 Vdc Output
Consult Sales  
Todos los precios se muestran en EUR
Notas: Supplied with Traceable Calibration Certificate
For Imperial Threads and psi Ranges please see the PX209_PX219 Series
For complete product specifications see the Related Links section at the bottom of this page.

We noticed you are from the US. Visit your local site for regional offers and live support.