Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121

Linear Diaphragm Karma Strain Gauges

SGK Series

Linear Diaphragm Karma Strain Gauges | SGK Series

Linear Diaphragm Karma Strain Gauges

105,00 SGK-LD1B-K350Q-PC11-E

  • Full Bridge Gauge on one carrier
  • K-Series Premium Karma Strain Gages
  • Stock Delivery with Solder Pads
  • Good Linearity Over Wide Temperature Range -75 to 200°C
  • Good Fatigue Life
  • Custom Gauges Available
Extensómetros, accesorios y instrumentación - Ver productos relacionados

Descripción

Find how a Strain Gauge works on this link.

The linear pattern strain gauges are used to measure strain in a single direction. The strain gauge pattern is shown on the left side of the table. Notice the "arrow" which indicates the principal stress direction.

The linear pattern strain gauges are available in a variety of styles and sizes. OMEGADYNE® offers miniature linear patterns for strain measurement of a stress concentration or high gradient areas. The terminations are offered both at one end of the grid, or with one at each end of the grid. Wide or narrow linear grid patterns are available. To determine if the strain gages have ribbon leads or solder pads, see the column labeled "TERM" short for termination, "L" indicates ribbon leads, and "SP" indicates solder pads. To determine if the strain gauges have temperature characteristics matched to steel or aluminium, see the column labeled "COMP" short for compensation, "ST" indicates steel, "AL" indicates aluminium. See the column labeled "BTP" for accessory bondable terminal pad model numbers.

Dimensions are listed for pattern gauge grid length (A) and width (B), and the matrix or carrier length (C) and width (D). The patterns include alignment triangles and letter codes indicating creep code.

For examples of actual strain gauge applications please see our Guide to strain gauge installations

For more in-depth application details and formulae see our guide on How to position strain gauges to monitor bending, axial, shear and torsional loads

We also have General information on strain gauge installation

Realizar Pedido(Especifique el número de modelo)
Número de pieza/Desc.
Cant.
Descripción
Sold in Packages of 5 Gages
Quick Ship
SGK-LD1B-K350Q-PC11-E
105.00
Stock: 4 semanas
 
Linear diaphragm full bridge, 350 ohms, compensated for steel
Quick Ship
SGK-LD1B-K350Q-PC23-E
105.00
Stock: 4 semanas
 
Linear Diaphragm full bridge, 350 ohms, compensated for aluminum
Todos los precios se muestran en EUR