Cookies de la web de Omega
Utilizamos cookies en la web. Estas cookies son esenciales para que la web que funcione correctamente. Si sigue sin cambiar la configuración, vamos a suponer que usted está dispuesto a recibir todas las cookies de este sitio web.

Para obtener más información acerca de las cookies, por favor haga clic aquí
Cerrar
Cesta  |  Contacto  | 
En España 800 900 532
Fuera de España(+34) 911 776 121
Layer N Banner

Smart Load Cell interface with I/O

SP-010-1

Smart Load Cell interface with I/O | SP-010-1

Smart Load Cell interface with I/O

146,09 SP-010-1

CE
  • Autoscaling 350 ohm - 5000 ohm Bridge Input Circuits
  • Auto adjusted activation current
  • Hardware and software TARE function
  • 2-point Linearization
  • Modular M12 construction
  • OMEGA Smart Core enabled

    -Data Logging

    -Integrated Alarm and Control

    -Plug and Play Device Detection

    -Sensor health monitoring

IIoT & Wireless Systems - Ver productos relacionados

Descripción


The Layer N SP-010 Load Cell Smart Probe provides an easy way to integrate your bridge devices to the Layer N Ecosystem. The SP-010 accepts 4-wire bridge sensors through its M12 4-pin connector and Layer N Smart Interfaces through its M12 8-pin connector. The M12-S-M-FM accessory connector can be utilized to easily connect wire leads to your SP-010.


The SP-010 determines the bridge impedance and applies an optimized pulsed bridge excitation current during measurements to minimize self-heating effects. The bridge voltage is then used to determine the applied force using bridge characteristics provided by the user.


A 2-point linearization correction may be applied with the ability to capture the measured values. TARE weight adjustment can be triggered through software or external switch closures.



Intuitive Configuration


Configure your Layer N Smart Probe using SYNC’s intuitive configuration interface. Additionally, an integrated command line interface allows for quick serial setup of your Smart Probe and Smart Interface using standard terminal emulators.



Edge Control and Built in I/O


The Layer N SP-010 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-010 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.



Smart Core Enabled


Smart Core is integral to all Layer N Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.



Smart Interface Modularity


Customize your Layer N Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Layer N Cloud.



Your Data at a Glance with Layer N Cloud


Layer N Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.








Specifications



INPUT POWER


Voltage: 2.8 VDC - 3.3 VDC

DIO DIGITAL INPUTS


VinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC

DIO DIGITAL INPUTS


2x Open Drain 100 mA max
VMAX= 30 VDC

MEASUREMENTS


Supported Strain Gauges
Bridge Sensitivity: 1 to 15 mV/V
Bridge Resistance: 250 to 15000 Ohm
Accuracy
Linearity Error: ±0.03% FSO
Thermal Error: ±0.005% FSO/C


ENVIRONMENTAL


Operating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated

MECHANICAL


Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs

GENERAL


Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Layer N Cloud, and Modbus Networks

M12 4-Pin Wiring



Pin Name Function
Pin 1 Exc - Excitation return
Pin 2 Sense + Bridge Output
Pin 3 Sense - Bridge Output
Pin 4 Exc + Bridge Excitation

M12 8-Pin Wiring



Pin Name Function
Pin 1 DIO 0 Discrete I/O Signal 0
Pin 2 INTR Interrupt Signal
Pin 3 SCL I2C Clock Signal
Pin 4 SDA I2C Data Signal
Pin 5 Shield Shield Ground
Pin 6 DIO 1 Discrete I/O Signal 1
Pin 7 GND Power Ground
Pin 8 3.3VDD Power Supply

Layer N SP-010



Model Number Description
SP-010-1 Load Cell Smart Probe with discrete I/O


Layer N Smart Interface


Layer N Smart Probes require a Layer N Smart Interface to operate and connect to your Layer N Ecosystem. There are both wired and wireless options.



Model Number Description
IF-001 USB Smart Interface
IF-002 RS485/Modbus Smart Interface


Accessories


An optional M12 4-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-010-1.



Model Number Description
LCKD Subminiature Load Cell with Rugged Industrial Design
M12-S-M-FM M12 4-pin screw terminal adapter
M12.8-T-SPLIT Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
M12.8-S-M-FM M12-8 pin Straight Plug Field install connector with screw terminals
DM12CAB-8-1-RA 1m (3.3’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-3-RA 3m (9.8’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-5-RA 5m (16.4’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-1 1m (3.3’) cable dual M12-8 straight connector
DM12CAB-8-3 3m (9.8’) cable dual M12-8 straight connector
DM12CAB-8-5 5m (16.4’) cable dual M12-8 straight connector


Realizar Pedido(Especifique el número de modelo)

¿Qué compraron otras personas?: Cuando se muestre este icono, haga clic para expandir una lista de los productos que otras personas adquirieron al comprar ese modelo.

Número de pieza/Desc.
Cant.
Descripción
  
SP-010-1
146,09
Stock: 1 semana
 
Smart Load Cell interface with I/O
Layer N Smart Interfaces - Smart Probes must be connected to an interface to operate
  
IF-001
63.47
Stock: En stock
 
Wired Smart Probe interface with USB connection
  
IF-002
130.40
Stock: 1 semana
 
RS485/Modbus Smart Probe Interface with M12, 5 pin RS485 connection
Load Cells
  
LCKD
Consult Sales  
Stock: 
 
 
Subminiature Load Cell with Rugged Industrial Design
Accessories-M12 8 pin cables and connectors
  
M12.8-T-SPLIT
36.09
Stock: 1 semana
 
Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
  
M12.8-S-M-FM
19.43
Stock: 1 semana
 
M12-8 pin Straight Plug Field install connector with screw terminals
  
DM12CAB-8-1-RA
36.73
Stock: 1 semana
 
1m (3.3’) cable dual M12-8 connector, right angle terminator
  
DM12CAB-8-3-RA
49.80
Stock: En stock
 
3m (9.8’) cable dual M12-8 connector, right angle terminator
  
DM12CAB-8-5-RA
60.04
Stock: 1 semana
 
5m (16.4’) cable dual M12-8 connector, right angle terminator
  
DM12CAB-8-1
40.04
Stock: En stock
 
1m (3.3’) cable dual M12-8 straight connector
  
DM12CAB-8-3
45.69
Stock: En stock
 
3m (9.8’) cable dual M12-8 straight connector
  
DM12CAB-8-5
60.04
Stock: En stock
 
5m (16.4’) cable dual M12-8 straight connector
Accessories-M12 4 pin connector
Click to expand/minimize a list of what others bought with theM12-S-M-FM
M12-S-M-FM
16.94
Stock: En stock
 
M12 4-pin screw terminal adapter
Todos los precios se muestran en EUR
We noticed you are from the US. Visit your local site for regional offers and live support.